Express Modeling Rubber Gel-Glue
Does nail extension in a professional salon have to take up so much time? Does a dream styling require spending more than 2 hours at the stylist's? No! Our Rubber Gel - Glue extends nails with the innovative Express Nail Modeling method, which allows to significantly speed up the entire process. Nail extension in 15 minutes! In stages so short that any stylist - even a beginner - will master them without any problems. Express Nail Modeling, a totally new, hit method of extending nails, will soon rule all beauty salons! Perfect for clients who need a quick, yet phenomenal and durable styling. The technique is especially recommended for medium-length salon nails.
- 100% India rubber, flexible with a rubbery structure,
- 100% transparency,
- very thick consistency,
- very high viscosity, comparable to that of Spider Gel; thanks to this property, gel molds stick very well on nails even before curing, they do not chip, do not fall off and can be properly set up directionally,
- curing time in a lamp until fully cured - 2 minutes,
- features dispersion (sticky layer) which, since the product is never left on the surface, is of no importance; the structure will remain sticky even if we wipe the dispersion off,
- when using the product to create a 3D decoration, wipe the dispersion and then polish the surface, preferably with the No Wipe top coat,
- polymerization curing: 2 minutes in the Slowianka LED lamp, 3 minutes in a UV lamp,
- after curing, the product is flexible, cushioning, which is extremely important for the Express Nail Modeling nail extension technique.
How to use –nail extension using the Express Nail Modeling method:
Preparation of nails as in the case of classic extensions:
- remove the cuticles;
- remove the epithelium and clean the nail grooves on the sides;
- the stylist decides whether to shorten the natural nail or not;
- matt the entire nail with a 240/240 polishing block or, if necessary, a 180 block;
- de-dust the nail with the Penguin brush;
- degrease the nail with a dust-free swab, soaked in Cleaner;
- apply a small amount of Ultra Bond adhesive and wait 2 minutes until the preparation evaporates;
- apply a thin layer of Base Gel or Rubber Base;
- cure in a UV lamp for 30 seconds.
Use of Rubber Gel - Glue on the nail prepared for extension:
- scoop a small amount of Rubber Gel - Glue from the jar, using the metallic spatula of the Master Brush 6;
- apply the product on the tip of the nail, on the free edge, spreading it evenly to the right and left, to create a thicker strip located across the nail (from the nail growth point, through the entire tunnel, to the next nail growth point);
- choose a Clear or Pink gel tip, put it on the nail and, pressing from the tip towards the cuticles, spread Rubber Gel - Glue inside the tip;
- press the gel tip very hard, not paying attention to excess product leaking out;
- direct the nail down or up and right or left, in order to maintain the proportions and aesthetics of all nails, in relation to each other;
- after placing the tip, use a spatula from the Master Brush 6 to remove the remains of the glue that have been forced out and remained on the nail plate, and replace it in the jar for reuse.
Note! Leftover Rubber Gel - Glue can be put back into the jar as long as it has not touched the skin of the fingertip. If the product has come into contact with skin, it must be removed and thrown away (try to master the method, so that there is as little excess of the product as possible during application);
- cure in a UV lamp for 2 minutes;
- shorten the nails and shape them with a 180/240 file;
- file the tip part near the cuticles;
- de-dust the nail with the Penguin brush;
- reapply Rubber Base or another cover base and fill the space near the cuticles;
- cure in a UV lamp (duration according to the instructions, depending on the selected base).
Next:
- wipe the dispersion;
- apply color;
- cure in a UV lamp;
- apply Top Coat,
- cure according to the instructions;
Or:
- apply Top Coat;
- cure according to the instructions.
How to use - applying decorations to nails:
Our Rubber Gel - Glue can be used to attach various types of decorations to the nails, such as pebbles, Swarovski crystals, pearls, chains or caviar.
- polish the nail with the No Wipe or other top coat;
- cure according to instructions;
- scoop a small amount of Rubber Gel - Glue with a spatula from the Master Brush 6 and apply it to the nail, gently tapping the product from above to create a "pie", the size of which depends on the size of the ornament you want to stick on the nail;
- proceed with application of decorations, by pressing the pebbles into Rubber Gel - Glue, side by side; a structure is created in which Gel - Glue is absolutely invisible - only pebbles, chains or caviar are visible, pressed into a transparent product;
- cure for 4 minutes in an LED lamp or 5 minutes in a UV lamp (this long time of exposure to light guarantees proper curing of the product, so that it holds the decorations well; especially since not all pebbles are transparent, but light must still pass through them).
How to use - 3D decorations on the nail (Clear Glass 3D decoration):
- form decorations using the transparent Rubber Gel - Glue product (e.g. bows, flower petals);
- apply decorations to the cured top;
- cure in a UV lamp;
- after curing, the decoration must be polished with the No Wipe top coat, Long Lasting top coat or a top coat with effects;
- apply the top very gently, using the Magic Brush 7 (Rubber Gel - Glue has a dispersion that becomes slightly matte and sticky after wiping, so decorating without gloss would be impractical);
- cure according to the instructions of the selected top.
The time savings offered by this innovative technique are impressive. Nail extensions can be done in just 15 minutes! This is a great solution for both the client and the stylist. The Modeling Nails espresso machine is also a response to the observations regarding the latest novelty - nail extensions using Duo Form.
This method is very popular, it shortens the working time, but it also has its disadvantages. When working with Dual Form, we apply gel or acrygel to the nails and often after applying them to the nails, if we do not harden them quickly, the forms jump and contain air. As a consequence, instead of speeding up the work, it takes much longer. Nail extension using Dual Form requires the skills of the stylist and long practice. You should adapt the method to the client and work very quickly. For stylists who do not have time for training and training, this may prove problematic.
That's why a new extension technique was created, perfect for beginner stylists and others. It is very easy to learn and does not require a lot of in-depth knowledge or long weeks of practice. Working with the Ekspres Modeling Nails technique is extremely easy thanks to our Rubber Gel - Glue product. It is used to attach and maintain gel forms on the nail. Its high viscosity plays an important role because it has the appropriate properties to maintain these forms, so they do not jump and do not change their shape. What's more, you can apply all your nails at once and align them with each other. Dual Form does not offer this option, and what's more, it requires quick hardening of the nails one by one, without the possibility of correcting any errors and shortcomings.
Working with Rubber Gel - Glue, we can glue all the nails and orient them according to our idea so that they look aesthetically even and directional relative to each other. Only then do we put our entire hand into the lamp, taking absolutely no hurry, so that the customer does not hit the lamp and does not move the molds. The stages are short enough that any stylist, even a beginner, can perform them. The Modeling Nails maker, a completely new, hit method of nail extension, will certainly take over in beauty salons, perfect for customers who need a quick, yet phenomenal and lasting styling.
The technique is especially aimed at medium-length salon nails
If you have any questions, please contact us: [email protected]
