F8 Drill bit
The F8 drill bit from Slowianka Nail Trends is a carbide pyramid drill bit with a rounded tip, ideal for working with artificial products like hybrids and acrylics. Versatile, it's great for taking off mass, leveling smile lines or cleaning the nail tunnel. Safe on cuticles thanks to narrow tip and differentiated blade depth. Non-vibrating, suitable for all rotations and sterilization. Requires cleaning before sterilization and protection from corrosion.
-
Carbide drill bit, pyramid-shaped with a rounded tip, created from stainless steel
-
Universal, designed for both milling and combination manicures
-
Suitable for working with artificial product
-
Blade shallowness between 0.5 and 0.7mm; larger at the tip, smaller at the root (deeper cuts to accelerate sawing of product mass)
-
Does not cause vibration when working, it can be used at both low and high speeds
-
Suitable for any type of sterilization and disinfection
- Dimensions: 6mm * 15mm
-
Insert the sterile and dry drill bit into the milling machine, keeping a maximum distance of 0.5 cm from the holder
-
Secure the placed drill bit
-
For removal of gel, hybrid, acrylic-gel, and acrylic products near the cuticles, the recommended speed is 10,000 to 20,000 revolutions per minute
-
For product removal near the free edge of the nail, we increase the speed to 35,000 rpm
-
We suggest using a dust absorber for better control of residue to be removed, with regular cleaning of the nail from dust
-
We operate the drill bit opposite to its direction of rotation
-
After work, the drill bit is dusted off, cleaned, disinfected, optionally immersed and sterilized in an autoclave at 130°C
-
We use metal preservatives to prevent corrosion and blade abrasion
F8 drill bit from Slowianka Nail Trends was created by us responding to market demand. It is a carbide drill bit, pyramid-shaped with a rounded tip. Created from stainless steel (carbide), which will be perfect for working with artificial product. Be it hybrids, hybrid bases, hybrid tops, gels and acrylics.
It is very versatile and can be used from pulling the mass off the natural nail (especially in the delicate areas near the cuticles - due to its rounded and narrow tip), to leveling the smile line when doing construction French, to cleaning the nail tunnel from the other side of the nail (when, for example, extending the artificial nail, using the Dual Form method). It is also ideal when it comes to filing the border of the natural nail with the artificial one - for smoothing. Small blade shallowness (between 0.5-0.7mm). At the tip, the shallowness of the blade is larger, while at the root, the cuts are deeper, which allows you to file a larger mass of product faster, while providing greater safety in working with cuticles.
The drill bit does not cause vibration when working, and can be used at both the low and highest possible speed of the milling machine. It is subject to any type of sterilization and disinfection, it should be protected against corrosion by using appropriate means. Before starting the sterilization sequence, make sure to clean the drill bit as much as possible from the artificial product. Do not sterilize the drill bit with product residue, it should be thoroughly cleaned beforehand. Also, do not saw the product uncured (this may result in "clogging" of the drill bit and its destruction).
If you have any questions, please contact us: [email protected]
